服务热线: 400-117-8816
           13406879330

扭剪扳手,扭剪螺栓专用扳手,扭剪电动扳手,扭剪枪生产厂家

当前位置:首页>技术文献如何选择标准中的螺栓?

如何选择标准中的螺栓?

来源:https://www.xjnwz.com日期:2020-09-02 发布人:admin

例如M16X35
For example, m16x35
根据需要固定的光孔直径,例如,光孔直径为11mm,可以选择螺栓,M10,该尺寸比其小一号。 于长度,它取决于紧固件的厚度和所需的螺母厚度。 通常,将这些厚度加在一起,然后再增加5mm。 通常,拧紧螺栓后螺母可以看到螺栓的末端为2?3mm。
According to the fixed light hole diameter, for example, if the light hole diameter is 11mm, bolt, M10, which is one size smaller than it, can be selected. As for the length, it depends on the thickness of the fastener and the required nut thickness. Usually, these thicknesses are added together and then increased by 5 mm. Generally, the end of the bolt can be seen to be 2? 3mm after tightening the bolt.