服务热线: 400-117-8816
           13406879330

剪螺栓专用扳手,扭剪扳手价格,扭剪扳手厂家,扭剪电动扳手,扭剪型电动扳手,扭剪枪的研发与生产

当前位置:首页>新闻中心>高强度扭剪螺栓是如何使用的

高强度扭剪螺栓是如何使用的

来源:https://www.xjnwz.com 日期:2022-06-07 发布人:wanzhong

高强度扭剪螺栓的预紧力-钢结构的强度螺栓是通过拧紧螺母来实现的。 通常使用扭力法、角度法或扭断螺栓尾部的方法来控制预紧力。目前有专用扳手显示扭力.通过测得的扭矩与螺栓张力的关系,施加扭矩达到必要的过张力值。

Pre tightening force of high-strength torsion shear bolt - the strength bolt of steel structure is realized by tightening the nut. The preload is usually controlled by torque method, angle method or the method of twisting the bolt tail. At present, there is a special wrench to display the torque Through the relationship between the measured torque and the bolt tension, apply the torque to reach the necessary over tension value.
转角法转角法分为两步,一是初始拧紧,另一个是*终拧紧。 简单的说,初拧一般是工人用普通扳手使被连接的部件紧密贴合,而*终拧紧是以初始拧紧位置为起点,*终拧紧角度为根据螺栓直径和层压板的厚度确定。
Angle method the angle method is divided into two steps, one is initial tightening, the other is * final tightening. To put it simply, the initial tightening is generally that workers use an ordinary wrench to make the connected parts closely fit, while the * final tightening is based on the initial tightening position, and the * final tightening angle is determined according to the bolt diameter and the thickness of the laminate.
用强*扳手转动螺母,当拧到预定角度值时,螺栓的拉力可以达到所需的预紧值。 为防止高强度螺栓受外界环境影响而改变扭矩系数,一般初、终拧紧应在同内完成。高强度扭剪螺栓的受力特性与一般高强螺栓的受力特性相同,只是施加预紧力的方法是通过破坏螺栓头切口的横截面来控制预紧力的值。
Use a strong * wrench to turn the nut. When it is screwed to the predetermined angle value, the tension of the bolt can reach the required pre tightening value. In order to prevent high-strength bolts from changing the torque coefficient due to the influence of the external environment, generally, the initial and final tightening shall be completed within the same day. The stress characteristics of high-strength torsional shear bolts are the same as those of general high-strength bolts, but the method of applying preload is to control the value of preload by destroying the cross section of the bolt head notch.
摩擦式高强度扭剪螺栓连接完全依靠被连接部件之间的摩擦阻力,摩擦阻力不仅是螺栓的预紧力,还取决于由以下因素决定的防滑摩擦面连接元件材料及其接触面的表面处理。 看完相信大家已经基本明白高强度螺栓应该用在什么地方以及正确的操作和拧紧了。
Friction type high-strength torsional shear bolt connection completely depends on the friction resistance between the connected parts. The friction resistance is not only the pre tightening force of the bolt, but also depends on the anti-skid friction surface connecting element material and the surface treatment of its contact surface determined by the following factors. After reading, I believe you have basically understood where high-strength bolts should be used and the correct operation and tightening.
以上就是扭剪扳手https://www.xjnwz.com为大家介绍的内容,感谢您在百忙之中查看我公司的信息内容,如果您想要了解的更多,欢迎您来电进行咨询!
The above is the torsional shear wrench https://www.xjnwz.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call us for consultation!