服务热线: 400-117-8816
           13406879330

扭剪扳手,扭剪螺栓专用扳手,扭剪电动扳手,扭剪枪生产厂家

当前位置:首页>技术文献电动扭剪扳手主要用于钢结构安装行业使用

电动扭剪扳手主要用于钢结构安装行业使用

来源:https://www.xjnwz.com日期:2022-02-10 发布人:admin

电动扭剪扳手主要用于钢结构安装行业,专门用于钢结构高强螺栓的安装。高强度螺栓用于连接钢结构节点,通常采用螺栓组的形式。高强度螺栓可分为扭剪型和大六角型两种。国标扭剪型高强度螺栓为M16、M20、M22、M24,非国标为M27、M30;国标大六角高强度螺栓为M16、M20、M22、M24、M27、M30等,一般高强度螺栓应先拧紧后拧紧,每一步都有严格的扭矩要求。所以,各种电动扭剪扳手都是为了满足各种拧紧的需要。

Electric torsional shear wrench is mainly used in steel structure installation industry, especially for the installation of high-strength bolts of steel structure. High strength bolts are used to connect steel structure joints, usually in the form of bolt groups. High strength bolts can be divided into torsion shear type and large hexagon type. The national standard torsion shear high-strength bolts are M16, M20, M22 and M24, and the non-national standards are M27 and M30; National standard large hexagon high-strength bolts are M16, M20, M22, M24, M27, M30, etc. generally, high-strength bolts should be tightened first and then tightened, and there are strict torque requirements in each step. Therefore, all kinds of electric torsional shear wrenches are designed to meet the needs of various tightening.
电动扭剪扳手主要用于紧固扭剪高强度螺栓,其目的是折断扭剪高强螺栓的梅花头。工作时,将扳手头对准螺栓头,拉动开关开始工作。几秒钟后,螺栓的梅花头就会折断,然后拔出扳手扳动扳机将梅花头弹出,这就是工作的结束。
The electric torsional shear wrench is mainly used to fasten the torsional shear high-strength bolt, and its purpose is to break the plum blossom head of the torsional shear high-strength bolt. When the wrench head is aligned with the bolt head, start to work. After a few seconds, the plum blossom head of the bolt will break, and then pull out the wrench and pull the trigger to eject the plum blossom head. This is the end of the work.
电动扭矩扳手
电动扭剪扳手主要用于钢结构安装行业,专门用于钢结构高强螺栓的安装。高强度螺栓用于连接钢结构节点,通常采用螺栓组的形式。高强度螺栓可分为扭剪型和大六角型两种。国标扭剪型高强度螺栓为M16、M20、M22、M24,非国标为M27、M30;国标大六角高强度螺栓为M16、M20、M22、M24、M27、M30等,一般高强度螺栓应先拧紧后拧紧,每一步都有严格的扭矩要求。所以,各种电动扭剪扳手都是为了满足各种拧紧的需要。
Electric torsional shear wrench is mainly used in steel structure installation industry, especially for the installation of high-strength bolts of steel structure. High strength bolts are used to connect steel structure joints, usually in the form of bolt groups. High strength bolts can be divided into torsion shear type and large hexagon type. The national standard torsion shear high-strength bolts are M16, M20, M22 and M24, and the non-national standards are M27 and M30; National standard large hexagon high-strength bolts are M16, M20, M22, M24, M27, M30, etc. generally, high-strength bolts should be tightened first and then tightened, and there are strict torque requirements in each step. Therefore, all kinds of electric torsional shear wrenches are designed to meet the needs of various tightening.
电动扭剪扳手是拧紧螺栓的工具,它可以帮助您安装和拆卸螺栓和螺母,并更准确地控制拧紧力矩。当扳手达到一定扭矩时,螺栓的梅花头即可被切断。螺栓的V形切口保证了扭矩精度和轴向拉力,拆装扭矩大,比手动操作更可靠。
Electric torsion shear wrench is a tool for tightening bolts. It can help you install and remove bolts and nuts, and control the tightening torque more accurately. When the wrench reaches a certain torque, the Torx head of the bolt can be cut off. The V-shaped notch of the bolt ensures the torque accuracy and axial tension. The disassembly torque is large, which is safer and more reliable than manual operation.