服务热线: 400-117-8816
           13406879330

专注于扭剪型电动扳手、扭剪型手动扳手、定扭矩电动扳手、扭矩倍增器的研发与生产

当前位置:首页>新闻中心>扭剪型高强螺栓达到扭矩值会断尾什么原理?

扭剪型高强螺栓达到扭矩值会断尾什么原理?

来源:https://www.xjnwz.com 日期:2020-07-08 发布人:admin

扭剪bai型螺栓使用扭剪型扳手施工,其du根部使用正反向扭杆直接通过“梅花头zhi”夹紧螺杆本dao身,故施拧时不会发生同转现象。
The torsion shear Bai bolt is constructed with a torsion shear wrench. The Du root of the bolt is directly passed through the "plum head Zhi" clamping screw body by using the forward and reverse torsion bar, so the phenomenon of simultaneous rotation will not occur during the tightening.
扭剪扳手
原理是:利用螺杆达到预拉力值时,材料所能承受对应的剪力,来设计削弱梅花头的根部截面,达到剪断的目的。
The principle is: when the screw reaches the pre tension value, the material can bear the corresponding shear force to design and weaken the root section of plum blossom head to achieve the purpose of cutting.
在施加扭矩聚集材料内拉应力达到设计值(“紧固轴力”)的同时,其材料的对应抗剪强度恰好能使梅花头削弱截面拧断。
At the same time, the corresponding shear strength of the material can just make the plum blossom head weaken the section to be broken.