服务热线: 400-117-8816
           13406879330

扭剪扳手,扭剪螺栓专用扳手,扭剪电动扳手,扭剪枪生产厂家

当前位置:首页>新闻中心大家知道气动扳手和电动扳手的区别吗?

大家知道气动扳手和电动扳手的区别吗?

来源:https://www.xjnwz.com日期:2019-07-12 发布人:admin

  气动扳手和电动扳手有什么区别?电动扳手螺丝松了怎么办?异常碳火花的原因是什么?如何电动扳手不能正常使用的问题?别担心,你想知道的都在这里。

  What's the difference between pneumatic wrench and electric wrench? What if the screw of electric wrench is loose? What's the cause of abnormal carbon spark? How to solve the problem that electric wrench can't be used properly? Don't worry, all you want to know is here.
  电动扳手是给电源或蓄电池供电的扳手,是拧紧高强螺栓的工具,又称高强螺栓枪。它主要分为冲击扳手、扭力扳手、扭矩扳手、角扳手、角扳手。
  Electric wrench is a wrench for power supply or battery supply, is a tool for tightening high-strength bolts, also known as high-strength bolt gun. It is mainly divided into impact wrench, torsion wrench, torque wrench, angle wrench, angle wrench.
  电动扳手是电源或蓄电池供电的扳手,是拧紧螺栓的工具。主要用于钢结构安装行业,专门安装钢结构高强螺栓,高强螺栓是用来连接钢结构的接触面,通常采用螺栓组的方式。
电动扭矩扳手
  Electric wrench is a wrench powered by power or battery and a tool for tightening bolts. Mainly used in the steel structure installation industry, special installation of steel structure high-strength bolts, high-strength bolts are used to connect the contact surface of steel structure, usually using the way of bolt group.
  电动扭矩扳手
  Electric Torque Spanner
  气动扳手,又称棘轮扳手与电动工具总组合,是一种以比较小的消耗提供高扭矩输出的工具。它通过恒功率源加速一定质量物体的旋转,然后立即击中输出轴,从而获得相对较大的扭矩输出。压缩空气是比较常见的动力来源,虽然也使用电力或水力。
  Pneumatic wrench, also known as ratchet wrench and electric tool combination, is a tool to provide high torque output with minimum consumption. It accelerates the rotation of a certain mass object through a constant power source, and then immediately hits the output axis, thus obtaining relatively large torque output. Compressed air is the most common source of power, although it also uses electricity or water.
  此外,气动扳手可在每一个标准棘轮套筒驱动器大小,从小1/4“驱动工具包安装和拆卸,多达3.5”。气动扳手一般不适合紧固陶瓷和塑料零件的安装件。
  In addition, the pneumatic wrench can be installed and disassembled up to 3.5% from 1/4 of the size of each standard ratchet sleeve driver. Pneumatic wrenches are generally not suitable for fastening ceramic and plastic parts.
  电动扭矩扳手
  Electric Torque Spanner
  电动扳手的螺丝松了
  The screw of the electric wrench is loose
  如果发现螺钉松动,应立即重新拧紧,否则电动扳手会失灵。
  If the screw is loose, it should be tightened again immediately, otherwise the electric wrench will fail.
  电机碳火花异常
  Abnormal Carbon Spark of Electric Machine
  应立即停止工作,进行检查和处理,看碳刷是否干净。故障排除。
  Work should be stopped immediately, checked and treated to see if the carbon brush is clean. Troubleshooting.
  出故障了
  It's out of order.
  确认现场连接的电源是否与电动扳手铭牌一致。是否有漏电保护器。如无异常或无法使用,应送相关维修店检查。
  Verify that the power supply connected on site is consistent with the nameplate of the electric wrench. Are there leakage protectors? If there is no abnormality or can not be used, it should be sent to the relevant brand repair shop for inspection.
  以上是电动扭矩扳手厂家为大家整理的相关内容,想要了解更多内容,欢迎访问网站:https://www.xjnwz.com
  These are the related contents of the electric torque wrench manufacturer for you. For more information, please visit the website: https://www.xjnwz.com.