服务热线: 400-117-8816
           13406879330

剪螺栓专用扳手,扭剪扳手价格,扭剪扳手厂家,扭剪电动扳手,扭剪型电动扳手,扭剪枪的研发与生产

当前位置:首页>新闻中心>电动扳手的特点

电动扳手的特点

来源:https://www.xjnwz.com 日期:2022-06-24 发布人:wanzhong

电动扳手的特点:(1)使用寿命长(2)手柄和机壳材料散热性好(3)功率大(4)耐撞击性强(5)手使用电动扭剪扳手是一种终紧扭剪型高强度螺栓的工具,一般有电动扭剪扳手和手动扭剪扳手,其中电动扭剪扳手比较常见。扭剪扳手的应用: 扭剪型高强螺栓的初紧可使用冲击电动扳手或定扭矩扳手,而终紧需要使用扭剪扳手,所以扭剪扳手是终紧扭剪型高强螺栓的。扭剪扳手的使用: 扭剪扳手主要是终紧扭剪型高强螺栓的,它的目的就是把扭剪型高强螺栓的梅花头打断即可。工作时将扳手头对准螺栓头,扣动开关即可开始工作,几秒后,螺栓梅花头将被扭断,然后抽出扳手扣动扳机将梅花头弹出,即结束工作。

Features of the electric wrench: (1) long service life (2) good heat dissipation of the handle and casing materials (3) high power (4) strong impact resistance (5) the electric torsion shear wrench used by hand is a tool for final tightening of torsion shear type high-strength bolts. Generally, there are electric torsion shear wrench and manual torsion shear wrench, of which the electric torsion shear wrench is more common. Application of torsional shear wrench: impact electric wrench or constant torque wrench can be used for initial tightening of torsional shear high-strength bolts, while torsional shear wrench is required for final tightening, so torsional shear wrench is used for final tightening of torsional shear high-strength bolts. Use of torsional shear wrench: the torsional shear wrench is mainly used for final tightening of torsional shear high-strength bolts. Its purpose is to break the plum blossom head of torsional shear high-strength bolts. During operation, align the wrench head with the bolt head, and then pull the switch to start the operation. After a few seconds, the bolt Torx head will be broken, and then pull out the wrench to pull the trigger to eject the Torx head, which is the end of the operation.
扭剪扳手的特点: 操作方便、省时省力、安全方便
Features of torsion shear wrench: easy to operate, time-saving, labor-saving, safe and convenient
型号:x24j-3扭剪扳手
Model: x24j-3 torsional shear wrench
额定电压:220V
Rated voltage: 220V
额定电流:5.0A
Rated current: 5.0A
额定功率:1050W
Rated power: 1050W
扭矩:1250N/m
Torque: 1250n/m
空载转速:10r/m
No load speed: 10r/m
净重:6.2kg
Net weight: 6.2kg
适用螺栓:M16  M20  M22  M24
Applicable bolt: M16 M20 M22 M24
以上就是扭剪型电动扳手为大家介绍的内容,感谢您在百忙之中查看我公司的信息内容,如果您想要了解的更多,欢迎您来电进行咨询!https://www.xjnwz.com
The above is what the torsion shear electric wrench introduced to you. Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call us for consultation! https://www.xjnwz.com