服务热线: 400-117-8816
           13406879330

剪螺栓专用扳手,扭剪扳手价格,扭剪扳手厂家,扭剪电动扳手,扭剪型电动扳手,扭剪枪的研发与生产

当前位置:首页>新闻中心>扭剪扳手速度慢怎么办?

扭剪扳手速度慢怎么办?

来源:https://www.xjnwz.com 日期:2022-07-04 发布人:wanzhong

扭剪扳手速度慢怎么办?

What if the speed of the torsion shear wrench is slow?
一般扭剪螺栓越大,使用扭剪扳手时速度会相对较慢,扭剪扳手要达到一定的扭力才能把扭剪螺栓拧掉。
Generally, the larger the torsional shear bolt is, the slower the speed will be when using the torsional shear wrench. The torsional shear wrench must reach a certain torque to screw off the torsional shear bolt.
如果想要速度快一点的话,可以先初紧,用扭矩扳手或者冲击扳手进行初紧,初紧到60%左右,再用扭剪扳手进行终紧,这样速度会更快一些。
If you want to speed up, you can tighten initially with a torque wrench or impact wrench. The initial tightening is about 60%, and then the final tightening is carried out with a torsion shear wrench. In this way, the speed will be faster.
另外扭剪扳手不需要调节扭力,只需要更换相同型号的套筒就可以,扭力是调节好的,不像定扭矩扳手需要跟据工程需要调节扭力。
In addition, the torque shear wrench does not need to adjust the torque, but only needs to replace the socket of the same model. The torque is well adjusted, unlike the constant torque wrench, which needs to adjust the torque according to the needs of the project.
以上就是为大家介绍的有关彩钢板厂家的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务.https://www.xjnwz.com
The above is a detailed introduction about the color steel plate manufacturers. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service https://www.xjnwz.com