服务热线: 400-117-8816
           13406879330

剪螺栓专用扳手,扭剪扳手价格,扭剪扳手厂家,扭剪电动扳手,扭剪型电动扳手,扭剪枪的研发与生产

当前位置:首页>新闻中心>扭矩扳手的日常维护及注意事项

扭矩扳手的日常维护及注意事项

来源:https://www.xjnwz.com 日期:2022-07-26 发布人:wanzhong

扭矩扳手的日常维护及注意事项

Daily maintenance and precautions of torque wrench
1.不使用时,请将扳手调整到更小扭矩值,并放入指定的盒子中。2.除棘轮机构外,不要润滑扳手的其他部件。必要时,向棘轮机构滴少许油。
1. When not in use, please adjust the wrench to the minimum torque value and put it in the specified box. 2. Do not lubricate other parts of the wrench except the ratchet mechanism. If necessary, drop a little oil on the ratchet mechanism.
3.请勿使用丙酮或其他溶剂清洁扳手。用蘸有少量酒精的干净布清洁。
3. Do not use acetone or other solvents to clean the wrench. Clean with a clean cloth dipped in a small amount of alcohol.
4.未经允许,不要拆卸扳手。不正确的拆卸会导致内部结构的损坏和仪器的严重损坏。
4. Do not disassemble the wrench without permission. Incorrect disassembly will cause damage to the internal structure and serious damage to the instrument.
5.使用的扭矩必须符合附表1的规定。6.这种扭矩扳手是高档精密工具,必须指定专人使用和保管
5. The torque used must comply with the provisions of Schedule 1. 6. This kind of torque wrench is a high-grade precision tool, which must be used and kept by a specially assigned person
以上就是为大家介绍的有关扭剪螺栓专用扳手的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务https://www.xjnwz.com
The above is a detailed introduction about the special wrench for twisting and shearing bolts. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude https://www.xjnwz.com