服务热线: 400-117-8816
           13406879330

专注于扭剪型电动扳手、扭剪型手动扳手、定扭矩电动扳手、扭矩倍增器的研发与生产

当前位置:首页>新闻中心>钢结构用扭剪型高强度螺栓连接副主要的用途?具有特点?

钢结构用扭剪型高强度螺栓连接副主要的用途?具有特点?

来源:https://www.xjnwz.com 日期:2020-10-16 发布人:admin

钢结构用bai扭剪型高强度螺栓连接副,主要用于工du业与民用建筑、公路与铁路桥梁。zhi塔架、管道支架、起重dao机械及其他需要采用摩擦型连接的扭剪型高强度螺栓连接副的场合。其特点是螺栓末端多一个十二角体。

Bai torsion shear type high strength bolt connection pair for steel structure is mainly used in industrial and civil buildings, highway and railway bridges. For tower, pipe support, hoisting machinery and other occasions where friction type connection of high strength bolt is required. It is characterized by an extra dodecagonal body at the end of the bolt.
安装时,须用特制的电扳手,其上下有两个套筒头,一个套在螺母的六角体上,另一个套在螺栓的十二角体上。拧紧时,对螺母施加顺时针力矩,对螺栓十二角体施加大小相等的逆时针力矩,使螺栓的末端与十二角体之间连接颈部承受扭剪,至颈部剪断为止,则安装完成。这种扭剪型高强度螺栓为一次型使用的紧固件,安装后一般不予拆卸。
During installation, a special electric wrench must be used. There are two socket heads on the top and bottom, one on the hexagon of the nut and the other on the dodecagonal body of the bolt. When tightening, apply clockwise torque to the nut and counter clockwise torque of equal size to the dodecagonal body of the bolt, so that the connection neck between the end of the bolt and the dodecagonal body is subject to torsional shear, and the installation is completed until the neck is cut off. This kind of torsion shear high strength bolt is a kind of one-time fastener, which is not disassembled after installation.