服务热线: 400-117-8816
           13406879330

专注于扭剪型电动扳手、扭剪型手动扳手、定扭矩电动扳手、扭矩倍增器的研发与生产

当前位置:首页>新闻中心>扭剪型电动扳手工作原理

扭剪型电动扳手工作原理

来源:https://www.xjnwz.com 日期:2020-10-20 发布人:admin

扭剪型电动扳手工作原理扭剪扳手主要是终紧扭剪型高强螺栓的,它的目的就是把扭剪型高强螺栓的梅花头打断即可。工作时将扳手头对准螺栓头,扣动开关即可开始工作,几秒后,螺栓梅花头将被扭断,然后抽出扳手扣动扳机将梅花头弹出,即结束工作。

 
The working principle of the electric wrench of the torsion shear type is mainly used for the final tightening of the high-strength bolt of the torsion shear type. The purpose of the wrench is to break the plum head of the high-strength bolt. When working, the wrench head should be aligned with the bolt head, and the switch can be pulled to start the work. After a few seconds, the bolt plum head will be broken, and then pull out the wrench to pull the trigger to pop out the plum head, which is the end of the work.